Restructure log location

Resolves #7 (closed)

mpsd-software-environment.py

@@ -82,7 +82,7 @@ def create_log_file_names(
     toolchain : str
         toolchain name (only for build log file)
     returns : tuple
-        tuple containing the strings of installer and build log file names
+        tuple containing installer_log_file, build_log_file, file names
     """
     installer_log_file = config_vars["installer_log_template"].substitute(
         mpsd_release=mpsd_release,
@@ -156,7 +156,7 @@ def set_up_logging(loglevel="warning", filename=None):
 
     This function sets up the logging configuration for the script.
     It configures the log level, log format, and log handlers
-    for both file and console output.
+    for both file and console(=shell) output.
 
 
     Parameters
@@ -170,34 +170,121 @@ def set_up_logging(loglevel="warning", filename=None):
          - filename to save logging messages into
 
     If loglevel is 'debug', save line numbers in log messages.
+
+    Returns
+    -------
+    None.
+
+    Logger instances are generally not passed around, but retrieved from the
+    logging module as shown below (they are singletons).
+
+    We provide two loggers:
+
+    1. log = logging.getLogger('')
+
+       This is the 'root' logger. It uses a RichHandler if rich is available for
+       output to the shell, otherwise plain text.
+
+       Typical use:
+
+       log.debug("...")
+       log.info("...")
+       log.warn("...")
+
+       Equivalent to
+
+       logging.debug("...")
+       logging.info("...")
+
+    2. print_log = logging.getlogger('print')
+
+       This uses the logging module to issue the message, but prints without
+       any further markup (i.e. no date, loglevel, line number, etc). Think
+       PRINT via the LOGging module.
+
+       We use this as a replacement for the print function (i.e. for messages
+       that should not be affected by logging levels, and which should always
+       be printed).
+
+       Typical and intended use:
+
+       print_log.info("Available toolchains are ...")
+
+       The major difference from the normal print command is that the output
+       will be send to the stdout (as for print) AND the file with name
+       filename, so that these messages appear in the log file together with
+       normal log output.
+
     """
+    # convert loglevel string into loglevel as number
     log_level_numeric = getattr(logging, loglevel.upper(), logging.WARNING)
-    assert log_level_numeric
     if not isinstance(log_level_numeric, int):
         raise ValueError("Invalid log level: %s" % loglevel)
 
-    handlers = []
-    if filename:
-        handlers.append(logging.FileHandler(filename))
+    # set up the main logger ("root" logger)
+    logger = logging.getLogger("")
+    # - "logger" logs everything
+    # - we use loglevel at handler level to write everything to file
+    # - and filter using  log_level_numeric (as the user provides) to
+    #   send logging messages to the console
+    logger.setLevel(0)
 
+    # the handler determines where the logs go: stdout/file
     if rich_available:
-        # set up logging as recommended for rich, see
         # https://rich.readthedocs.io/en/stable/logging.html
-        handlers.append(rich.logging.RichHandler())
+        shell_handler = rich.logging.RichHandler()
+        # rich handler provides metadata automatically:
         logging_format = "%(message)s"
-    else:  # rich not available, define our own output
+        # for shell output, only show time (not date and time)
+        shell_formatter = logging.Formatter(logging_format, datefmt="[%X]")
+    else:
+        shell_handler = logging.StreamHandler()
         # include line numbers in output if level is DEBUG
         linenumbers = " %(lineno)4d" if log_level_numeric == logging.DEBUG else ""
-        handlers.append(logging.StreamHandler())
         logging_format = "%(asctime)s %(levelname)7s" + linenumbers + "  |  %(message)s"
+        shell_formatter = logging.Formatter(logging_format)
 
-    logging.basicConfig(
-        level=log_level_numeric,
-        format=logging_format,
-        datefmt="[%X]",
-        handlers=handlers,
-        force=True,
-    )
+    # here we hook everything together
+    shell_handler.setFormatter(shell_formatter)
+    # use the log_level_numeric to decide how much logging is sent to shell
+    shell_handler.setLevel(log_level_numeric)
+    logger.addHandler(shell_handler)
+
+    # if filename provided, write log messages to that file, too.
+    if filename:
+        file_handler = logging.FileHandler(filename)
+        # if we have a file, we write all information in there.
+        # We could change the level, for example restrict to only DEBUG and above with
+        # file_handler.setLevel(logging.DEBUG)
+        file_logging_format = "%(asctime)s %(levelname)7s %(lineno)4d  |  %(message)s"
+        file_formatter = logging.Formatter(file_logging_format, datefmt="[%X]")
+        file_handler.setFormatter(file_formatter)
+        logger.addHandler(file_handler)
+
+    #
+    # new logger for printing
+    #
+    print_log = logging.getLogger("print")
+    print_log.setLevel(logging.INFO)
+    print_log.propagate = False
+    # create formatter 'empty' formatter
+    formatter = logging.Formatter("%(message)s")
+
+    # create, format and add handler for shell output
+    ch = logging.StreamHandler()
+    ch.setFormatter(formatter)
+    print_log.addHandler(ch)
+
+    # if filename provided, write output of print_log to that file, too
+    if filename:
+        # create, format and add file handler
+        fh = logging.FileHandler(filename)
+        fh.setFormatter(formatter)
+        print_log.addHandler(fh)
+
+    #
+    # short message
+    #
     logging.debug(
         f"Logging has been setup, loglevel={loglevel.upper()}"
         + f"{filename=} {rich_available=}"
@@ -631,7 +718,7 @@ def install_environment(
 
     # Set required variables
     release_base_dir = script_dir / mpsd_release
-
+    mpsd_microarch = get_native_microarchitecture()
     toolchain_dir = release_base_dir / mpsd_microarch
     toolchain_dir.mkdir(parents=True, exist_ok=True)
     spack_setup_script = release_base_dir / "spack-environments" / "spack_setup.sh"
@@ -651,6 +738,8 @@ def install_environment(
             "No toolchains requested. Available toolchains for release "
             f"{mpsd_release} are: \n {available_toolchains}"
         )
+        print_log = logging.getLogger("print")
+        print_log.info(f"{available_toolchains=}")
         return
 
     for toolchain in toolchains:
@@ -667,9 +756,15 @@ def install_environment(
         if not os.path.exists("logs"):
             os.mkdir("logs")
         for toolchain in toolchains:
-            # Set the install log file name to config_vars["install_log_file"]
-            # and replace _toolchains_ with the toolchain name and
-            # _mpsd_spack_ver_ with mpsd_release
+            # Set the install log file name from create_log_file_names
+            _, build_log_file_name = create_log_file_names(
+                mpsd_release, mpsd_microarch, "install", toolchain=toolchain
+            )
+            build_log_folder = release_base_dir / "logs"
+            build_log_file = build_log_folder / build_log_file_name
+            # if logs folder dosent exist, create it
+            if not os.path.exists(build_log_folder):
+                os.makedirs(build_log_folder)
 
             logging.info(f"Installing toolchain {toolchain} to {toolchain_dir}")
 
@@ -677,7 +772,7 @@ def install_environment(
             setup_log_cmd(
                 mpsd_release,
                 script_dir,
-                msg=f"installing {toolchain} and logging at {install_log_file}",
+                msg=f"installing {toolchain} and logging at {build_log_file}",
             )
             setup_log_cmd(
                 mpsd_release,
@@ -689,7 +784,7 @@ def install_environment(
             )
             run(
                 f"bash {spack_setup_script} {' '.join(install_flags)} {toolchain} 2>&1 "
-                f"| tee -a {install_log_file} ",
+                f"| tee -a {build_log_file} ",
                 shell=True,
                 check=True,
             )
@@ -792,8 +887,8 @@ def main():
 
     # Get machine configs
     os.environ.get("MPSD_OS", "UNKNOWN_OS")
-    mpsd_microarch = os.environ.get("MPSD_MICROARCH", "UNKNOWN_MICROARCH")
-    # release `dev` in script_dir/dev-23a
+    mpsd_microarch = get_native_microarchitecture()
+    # target dir is the place where this script exists. the
     script_dir = Path(os.path.dirname(os.path.realpath(__file__)))
     mpsd_release = args.release
     # parse logging first
@@ -801,14 +896,18 @@ def main():
     installer_log_name, build_log_name = create_log_file_names(
         mpsd_release=mpsd_release, mpsd_microarch=mpsd_microarch, action=args.action
     )
-    installer_log_file = (
-        script_dir / mpsd_release / mpsd_microarch / "logs" / installer_log_name
-    )
+    log_folder = script_dir / mpsd_release / mpsd_microarch / "logs"
+    # if the log_folder dosent exist, dont log this message if
+    #  the command is a info-only command
+    if args.action not in ["status", "available"]:
+        if not os.path.exists(log_folder):
+            os.makedirs(log_folder)
+        installer_log_file = log_folder / installer_log_name
+    else:
+        installer_log_file = None
 
     set_up_logging(args.loglevel, installer_log_file)
 
-    # target dir is the place where this script exists. the
-
     # Check the command and run related function
     if args.action == "remove":
         remove_environment(args.release, args.toolchains, script_dir)